A/C problem troubleshoot - Part 2

This is part 2 of a/c problem troubleshoot. In last post i have talk about cleaning of evaporator, condenser, and changing of cabin air filter and also filter drier. In this post i gonna talk the other problem.

Following the last post, now if the answer to the above question is in a short time, like say in a months, or six months, then the problem will not be very easily troubleshooted. For this kind of problem, then need to ask this question:

1. Do you change any things other than cabin air filter, filter drier on the last service?
2. What is the things you change on last service?

Depending on the answer of this question, the problem will most likely linked to what the answer is. What i mean is, the part/s you change other than cabin air filter and filter drier, is most likely Expansion valve, Blower motor, Cooling motor, Compressor, Evaporator, and Condenser. If you has changed any of the parts i mention above, then the problem is much more serious. I will explain the uses of each part below:

1. Expansion valve - Use to regulate flow of refrigerant into evaporator. It is also use to convert a high pressure refrigerant into low pressure refrigerant.

2. Blower motor - Use to push hot surrounding air inside cabin to go through evaporator for energy transfer.

3. Cooling motor - Use to push cold surrounding air around car to to through condenser for energy transfer.

4. Compressor - Use to making flow of refrigerant so that refrigerant will move inside the a/c system. Also use to giving energy to refrigerant for use in cooling.

5. Evaporator and Condenser - Use as a contact point for refrigerant and surrounding air for energy transfer.

Now, changing of evaporator and condenser usually mean there is a leak of refrigerant through this 2 parts. The leak of refrigerant on this 2 parts will cause the refrigerant level to drop out from the system thus there is not enough refrigerant for a proper a/c to function. Evaporator and condenser will also suffer from condenser oil blockage if the condenser oil level is too high for the a/c system. In this case, either doing a flush on the 2 parts to clear out the oil, or changing the parts directly is a common practice. For leaking case, i will recommend to just change a new parts as it need a very experience person on brazing alloy to braze the hole on the condenser and evaporator.

Blower motor and cooling motor play a major parts in a/c system. This is because if any of this 2 parts fail, then the whole a/c system will suffer from a refrigerant liquid lock, or refrigerant overheat, depend of which parts is failing.

When refrigerant liquid lock happen, the flow of refrigerant will become slow or even totally stop. This happen when the liquid state refrigerant is unable to carry enough energy to boil into vapor (yes, this is what happen when blower motor is failing). And if the liquid refrigerant flow back into compressor, then the compressor will suffer from overheating cause the liquid refrigerant will carry all the compressor oil needed for lubricant out from the compressor (see my post on charging refrigerant in gas or liquid).

When refrigerant overheating happen, the refrigerant is still carry all the energy given by the compressor (this is when cooling motor is the culprit), thus the temperature of the refrigerant can go way up to 80 degree C, at this point, the compressor oil which is in the system will be boiling and cause the oil to break down and becoming an oil sludge which in turn will cause refrigerant flow blockage.

In between the condenser and evaporator is the expansion valve and compressor. Talk bout expansion valve first. This valve will suffer no matter if the refrigerant is having liquid lock or overheating. And if the valve is block due to the problem, then the refrigerant flow will be blocked and stopped, this in turn will make the compressor to break down and broken.

When will the compressor broken? Well it depend on which part of the compressor is failing. Usually when liquid lock is happening, the piston and piston block of the compressor will suffer the most, as this is where the contact of metal occur. Poor lubrication will cause the wall of piston rub against the block body directly then the metal will comes off and the whole compressor will be suffer from metal chip grinding. If overheating is happening, then the valve plate of compressor will suffer from high pressure torture and resulting in broken valve plate thus cannot hold the pressure and back pressure will occur. ( I will have a detail compressor post in future )

Here is the main problem when you change any of this parts, almost all of the a/c shop will not do a whole a/c system flush to save costs and time. Any parts i mention in here, once broken and need replacement, i highly recommend to do a whole a/c flush to flush out all the old compressor oil and debris before installing the new components. If this step is not taken, then the old things is still inside the system and it will cause the new parts to fail once more in a short amount of time. This is why the a/c problem won't be solved no matter what the parts you change. Unless the whole a/c system is replaced include all the hoses and piping.

I have rush trough this troubleshoot parts because if need explaining all the related parts and how to diagnose, then i will take whole a lot of time. I will cover this part 2 again in future after i have all the dedicated post of each components.

Any question can leave in the comment. I will answer it the best i could. Stay tune for more car a/c from me.

A/C problem troubleshoot - Part 1

In this post i gonna talk on how to troubleshoot an a/c problem in car. Many of us will not regularly service our car a/c like what we did on our engine. This is because car manufacturer rarely push to buyer and car owner about the importances to keep a good a/c system as to prevent unwanted break down of a/c. Of cause if compare an a/c to an engine, sure the engine is most important. But as a car owner, who does not want the car to be in good condition the whole time? So we must improve our self to know how to keep a good running car, so that the car does not fail us on the most importance day in our life.

So, the basic of a/c i was talking on my blog, i have gone through all the parts which is used in our car a/c. So if some parts or a part is failing, it will cause problem, then the a/c will not produce nice cold air as it should. Went into a/c shop, we will depend on the technician to tell us what is causing the problem.

Most of car owner is not aware that the detail the technician give is correct or not. They just simply say: ok, just do what you should do.. Then the nightmare begin...A proper done job on car a/c will save a lot of money and time in the long term. But a poorly done job.....It will not only cost you a lot of time, it will also burn a hole through your wallet. Trust me when i say a hole in the wallet.

Then, how should one troubleshoot an a/c problem? Ask your self this question first before making any move:

For new car less than 4 years:
1. Have you done your a/c service?
2. Have you change air con cabin air filter?

For old car more than 4 years:
1. When is the last time you service the a/c?
2. How long have it been after the last a/c service?
3. Have you change air con cabin air filter?
4. Have you change filter drier on last service?

This question need to be ask first, because many a/c problem is cause by a dirty cabin air filter, dirty evaporator, dirty filter drier and dirty condenser. When the cabin air filter and evaporator is dirty, the refrigerant inside evaporator will not have enough contact with the hot air outside evaporator, then the hot air cannot efficiently transfer the heat to the refrigerant (see my post on How does it work).

A dirty filter drier will cause the refrigerant flow be restricted. This will cause a weak flow of liquid state refrigerant into the evaporator. When this happen, there will be not enough refrigerant flow to take away the heat of the hot air around evaporator. Dirty condenser will cause poor effectiveness of the refrigerant to transfer heat to surrounding air before flow into evaporator. A high energy(heat) refrigerant will only be able to carry little energy from the hot air inside cabin thus the air will not be cooled enough.

This kind of problem can be easily solve by having a full a/c cleaning done on evaporator and condenser with new cabin air filter and also new filter drier changed. With a proper cleaning on evaporator and condenser as well as a proper level of refrigerant recharge back into system, the problem of not producing cold air should be okay in at least 2-3 years.

This is part 1 of this post. I will talk bout other problem in second post. Stay tune for more.